Section 179 vs. Bonus Depreciation: Year-End Equipment Buying Guide for Houston Contractors

If you’re planning to buy an excavator, a skid steer, or a new work truck before the end of 2026, you can likely deduct the full cost on this year’s return. Two federal tax rules make that possible: Section 179 and 100% bonus depreciation. They reach the same result most of the time, but they work differently when profits are tight, when you’re buying a lot of equipment, or when you plan to sell or trade in later. Here’s how each one works, which fits your situation, and the one date that decides whether you get the deduction this year.

Bonus Deprecitation blog post from Jones CPA Group

Both rules let you deduct equipment in year one

Without either rule, a $180,000 excavator gets deducted a piece at a time over five to seven years. Section 179 and bonus depreciation let you take the full amount on the return for the year you put it to work.

The limits for 2026 are high enough that most Houston contractors won’t hit them:

  • Section 179: up to $2,560,000 of equipment, with the limit shrinking dollar for dollar once you place more than $4,090,000 of equipment in service during the year.
  • Bonus depreciation: 100% of the cost, with no dollar cap, for equipment acquired after January 19, 2025. Congress made the 100% rate permanent in 2025.

Both rules cover new and used equipment, and both apply to financed purchases. If you finance a $250,000 dozer with 10% down, you can still deduct the full $250,000 in the year it goes into service.

The deduction depends on when equipment goes to work

This is where year-end buying goes wrong. The deduction belongs to the year the equipment is placed in service, which means delivered, set up, and ready to use on a job. Paying for it, signing the purchase order, or putting down a deposit doesn’t count.

Say you order a new excavator on December 10 and the dealer can’t deliver until January 8. You paid in 2026, but the deduction lands on your 2027 return. If you were counting on that write-off to offset a strong 2026, you’ll be looking at a larger tax bill than you planned for.

For anything you’re buying in November or December, get a firm delivery date in writing, and ask the dealer whether units are on the lot or still being shipped from the factory. Keep the delivery ticket and the first job record showing the machine in use. Those two documents prove the placed-in-service date if the IRS ever asks.

For a profitable contractor buying a normal amount of equipment, Section 179 and bonus depreciation produce the same deduction. The difference shows up in three situations.

When profits are low. Section 179 can’t exceed your taxable business income for the year. Bonus depreciation has no income limit and can create a loss. Say a Cypress roofing company earns $120,000 in 2026 and buys $300,000 in equipment. Section 179 stops at $120,000, and the rest carries forward. Bonus depreciation deducts the full $300,000, creating a $180,000 loss that carries forward to offset future profits. Those future offsets are generally limited to 80% of taxable income each year, so the carryforward can take more than one year to use up.

When you want to pick and choose. Section 179 is elected asset by asset, so you can expense the excavator and depreciate the trailer normally. Bonus depreciation applies automatically to every asset in the same class unless you elect out of that class. If you want to save deductions for a year when you expect higher income, Section 179 gives you more control.

When you’re spreading deductions across years. If 2026 is a slower year and 2027 looks stronger, taking the full write-off now may not help much. Your Jones CPA Group advisor can model both years before you decide how much to deduct.

Trucks and vehicles have their own rules

Work trucks are where most contractors spend at year-end, and the vehicle rules depend on weight and body style.

  • Heavy pickups with a cargo bed of at least six feet, like many F-250, Silverado 2500, and Ram 2500 configurations, generally qualify for the full write-off with no special cap.
  • Heavy SUVs between 6,001 and 14,000 pounds gross vehicle weight are capped at $32,000 under Section 179 for 2026, but bonus depreciation can cover the rest of the cost.
  • Lighter vehicles under 6,000 pounds fall under the passenger auto limits, which cap first-year depreciation well below the purchase price.

Every vehicle has to be used more than 50% for business to qualify, and the deduction is reduced to your business-use percentage. If a truck you expensed later drops to 50% business use or less, part of the deduction gets added back to your income. A mileage log is the simplest way to protect it. For more on vehicles, see The Smart Way to Write Off Your Car.

Plan for trade-ins and sales now

Contractors often trade in old equipment when they buy new. Since 2018, a trade-in of equipment is treated as a sale for tax purposes. If you fully deducted a skid steer three years ago and trade it in for $30,000 of credit today, that $30,000 is generally taxable as ordinary income.

The new purchase still lowers your taxable income, by less than the sticker price. A $90,000 new machine with a $30,000 trade-in credit gives you a $90,000 deduction and $30,000 of recaptured income, for a net $60,000 reduction in taxable income. Factor that in before you assume the full purchase price comes off your tax bill.

Buy equipment your business needs

A deduction reduces your tax by a percentage of what you spend. At a federal tax rate of 24% to 37%, a $100,000 machine saves roughly $24,000 to $37,000 in tax, and the other $63,000 to $76,000 comes out of your business. The write-off lowers the real cost of equipment you need, so base the purchase on the work you have lined up.

Texas has no state income tax, so there’s no state return to adjust. If your company owes Texas franchise tax, the state uses its own depreciation rules, so talk with your CPA about how new equipment affects that report too.

Your year-end equipment checklist

  1. List every piece of equipment and every vehicle you plan to buy before December 31.
  2. Confirm delivery dates in writing, and move orders up if a unit won’t arrive in time.
  3. Estimate your 2026 profit so you know whether Section 179’s income limit will matter.
  4. Check the weight rating and bed length on any truck or SUV before you buy.
  5. Price out trade-ins and account for the recaptured income.
  6. Keep delivery tickets, first-use job records, and mileage logs with your tax files.

Jones CPA Group has worked with Houston contractors and builders since 2011, from job costing and bookkeeping to year-end tax planning. A planning call in October or November can decide how much of your 2026 equipment spending pays off on this year’s return.

Section 179 and Bonus Depreciation FAQs

What is the Section 179 limit for 2026?
For tax years beginning in 2026, businesses can expense up to $2,560,000 of qualifying equipment under Section 179. The limit phases out dollar for dollar once total equipment placed in service exceeds $4,090,000.

Is bonus depreciation 100% in 2026?
Yes. Equipment acquired after January 19, 2025 qualifies for 100% bonus depreciation, and the 100% rate is now permanent.

Do I get the deduction if I pay for equipment in December but it arrives in January?
No. The deduction belongs to the year the equipment is placed in service, meaning delivered and ready to use. Equipment that arrives in January is deducted on the following year’s return.

What is the difference between Section 179 and bonus depreciation?
Section 179 is elected asset by asset and can’t exceed your taxable business income. Bonus depreciation has no income limit, can create a loss, and applies to every asset in the same class unless you elect out.

Can I write off a work truck under Section 179?
Generally yes, if it is used more than 50% for business. Heavy pickups with a cargo bed of at least six feet usually qualify in full. Heavy SUVs are capped at $32,000 under Section 179 for 2026, with bonus depreciation available for the rest.

Tracy Jones

Tracy Jones

As President and Founder of Tracy Jones CPA, LLC, Tracy Jones specializes in tax planning and CFO services for small business owners. She is a Certified Public Accountant who works closely with industry leaders to stay on the cutting edge of technology and tax planning strategies.